Sailun 225 70 R17C 112/110R Commercio Pro 2025

Sailun Tyres designed the Commercio Pro as a commercial tyre for European-market vehicles, with an emphasis on load-bearing capability, durability, comfort and safety. The tread uses a controlled block layout with siping and wide grooves to maintain contact on wet roads while helping the tyre wear more evenly. Sailun's published specifications list the 225/70R17C version as 112/110R with a 6PR construction, a 6.5J standard rim and a maximum load of 1,120 kg in single fitment and 1,060 kg in dual fitment. 0

Load Capacity and Commercial Stability

The 112/110 load rating is particularly important for a working van. In the correct application, the 112 index supports up to 1,120 kg per tyre in single fitment, while the 110 index corresponds to 1,060 kg per tyre in dual fitment. The R speed rating is suitable for speeds up to 170 km/h. These figures make the tyre appropriate for commercial vehicles where cargo weight and repeated loading are part of normal operation.

The 225 mm width also gives the tyre a substantial footprint without moving into an unnecessarily wide configuration for a van. Under heavier loads, correct inflation is essential because tyre pressure has a direct effect on casing temperature, steering stability, braking behaviour and tread wear.

Wet-Road Behaviour

The Commercio Pro uses longitudinal drainage channels together with tread siping to help move water away from the contact patch. The available specification for this size lists an A wet-grip rating and 72 dB external rolling noise. 1

For a commercial van travelling through city traffic or longer motorway routes, the tread is designed to provide controlled braking and steering behaviour rather than the aggressive loose-surface traction of an all-terrain tyre. The groove arrangement also helps maintain usable contact when rainwater builds up on the road.

Durability for Working Vehicles

Commercial tyres experience different stresses from passenger-car tyres because they frequently operate with changing loads, repeated stops and starts and longer periods of continuous driving. The Commercio Pro's casing and bead construction are intended to support these working conditions, while its tread design distributes pressure across the contact area to encourage more even wear. Sailun specifically describes the model as an evolution focused on load-bearing capability, durability, driving comfort and safety. 2

Ride Comfort and Road Noise

The 70-series profile provides considerably more sidewall than a low-profile passenger tyre, which helps absorb some of the sharper movements encountered on ordinary urban roads. This is useful for vans that spend much of their time over patched asphalt, expansion joints and uneven city surfaces. Sailun also states that the connected shoulder grooves and optimized tread pitch are intended to reduce noise vibration and improve driving comfort. 3

Who Should Choose the Commercio Pro

The Sailun Commercio Pro 225/70 R17C 112/110R is suited to vans and light commercial vehicles approved for this exact 225/70R17C specification. It is a sensible configuration for delivery work, trade vehicles and commercial fleets that need substantial load capacity while remaining primarily road focused. It is not intended as an off-road tyre, and buyers should always match the complete load and speed specification with the vehicle manufacturer's requirements.

For customers using Dwbtyres and looking to buy car tyres in UAE, this Commercio Pro specification offers a practical commercial setup where load support, wet-road control and everyday durability are more important than sporty handling. The 2025 Sailun catalogue identifies this size as 225/70R17C 112/110R and shows a 6PR construction. 4

Technical Specifications